多年来很多客户都要求我们供应一种快速固化、施工简单、并能轻易的用在 POR-15 或其它保护层上的涂料，为了满足这一需求，我们研发了 POR-15 自我反应性底漆。
本产品可在固化后了几个月甚至几年的 POR-15 防腐涂料上使用。
本产品不如 POR-15 TIECOAT PRIMER 底漆厚重，但它可以方便的用喷或刷的方法在任何现有的涂料层上使用。本底漆喷刷30分钟后即可喷刷面漆。POR-15 自我反应性底漆 POR-15 防腐涂料有极强的亲和力，而其它所有的面漆也能强有力的依附在其之上。所以它是已经固化的 POR-15 防腐涂料与其它面漆之间的完美介质。它固化后可以轻微打磨，而且如有需要可以喷刷多层。
如果您在极度老化的 POR-15 防腐涂料表面施工，我们建议先用280至320号砂纸轻微打磨表面。

In response to many customer inquiries requesting a quick drying and easy-to-apply coating which enables a restorer to quickly topcoat POR-15 and other basecoats, we have developed POR-15 Self-Etching Primer.
With this product, you can even topcoat POR-15 that’s been in place for months or years.
POR-15 Self-Etching Primer is NOT a high-build primer, like POR-15’s TIECOAT PRIMER, but it can be sprayed or brushed on almost any painted surface and can be topcoated 30 minutes later. It bonds incredibly well to POR-15 Rust Preventive Paint, and all topcoats bond incredibly well to POR-15 Self-Etching Primer. It can be sanded lightly, and, if desired, multiple coats may be applied.
We strongly recommend this fine product, which we sell with our unconditional money-back guarantee of satisfaction. It is available in pints and quarts as well as in a large aerosol spray (15 ounces). In situations where you are topcoating a very old POR-15 finish, we first recommend a light sanding with any 280 to 320 grit paper.